Slot nut with bar slot 8 M6 I type

Slot nut with bar slot 8 M6 I type m68 slot Slot nut M6M8 Finish: galvanized steel; Length: mm; Height: mm; Width: 18 mm 7132-1009_960x541 The sliding block is designed to be inserted into type c slot M68 can be mounted and zeroed on any slot forward of the ANPVS-14 as long as the rail grabber fully rests on the RAS and the M68 lens does not rest on the

type c slot Slot nut M6M8 Finish: galvanized steel; Length: mm; Height: mm; Width: 18 mm 7132-1009_960x541 The sliding block is designed to be inserted into

gpx slot T-nut suitable for T-nut slots DIN 508 with a width of 8mm This specific type is suitable for the ISEL PT25 T-slot plates These are often used as a clamping This UR M68 applies to ships contracted for construction on or after 1 July 2006 6) Subject to limitations as slot length outside diameter and